|
|
|
|
SystiMatic
saw blades went out of production in early 2011. They
have some blades in stock but we have no way of
knowing what's available and what's not until we
either send in an order or call about an individual
blade. Either way, this is likely to cause a delay of
a day or two in getting you what you need, if they
don't have it. If you want a SystiMatic blade, go
ahead and order it but be prepared to find out it
isn't available anymore.
Just Saw Blades recommends that you select a blade
from one of our other two suppliers instead. Both Tenryu
and Popular
Tools make excellent saw blades for most
applications. Tenryu blades tend to be a bit thinner
and lighter than SystiMatic but do just as good (or
better) a job. If you feel you need or want a heavier
industrial grade blade, Popular Tools has a wider
selection than anyone.
Popular Tools has a
complete line of blades configured like the Budke
Combination Blade. Go to www.justsawblades.com/popular/combination_blades.html
|
Our shipping and handling fees
are just what UPS charges us, based on weight and destination. There is no markup. Want more information on our
shipping? See Shipping Notes
| BLADE
SPECIFICATIONS |
MACHINE
TYPE |
| TS |
Table Saw |
CM |
Compound Miter
Saw |
| PTS |
Portable
Table Saw |
SCM |
Sliding
Compound Miter Saw |
| STS |
Sliding
Table saw |
RA |
Radial Arm
Saw |
| MS |
Miter Saw |
SLR |
Straight
Line Rip Saw |
* These
two blades are identical to a regular Budke Combination blade
except they have a thinner plate and kerf.
For more combination and
table saw blades, go to: Tenryu
Rapid Cut Series or Gold
Medal Series
 |
The General Purpose saw blade, designed
for ripping and crosscutting solid wood, plywood and
particle board. Rated #1 in its price class by Wood
Magazine.
This new addition to the SystiMatic
family of professional quality saw blades is designed to
do many jobs: ripping and crosscutting in solid wood,
plywood and particle board. Made with tough
C4 carbide, it will outlast other blades and continue to give superior cuts
because it
stays sharp longer than blades with softer carbide. And
when we say superior cuts, we mean it: clean, true and
chip-free. Primarily designed for table saws, it can be
used on radial arm and miter saws.
GP - 20º Alternating Top
Bevel
15º Hook Angle |
Don't believe us? Read what customers are saying:
"The new Systimatic 40 tooth
General Purpose blade has much to recommend it. For starters,
I did a run-out test using a dial indicator gauge accurate to
.001, and the blade was dead-on flat. During the course of
working on various projects, I ripped and crosscut
five-quarter and four-quarter oak, and 3/4" and 1/4"
plywood.
"The performance of the blade
in ripping is very impressive. The cuts are clean, flat, and
true. I didn't even need to use my jointer before gluing
the boards into a panel -- in fact, the blade did a better job
than my jointer! All of the rip cuts exhibited zero tear-out.
"The General Purpose blade also
excelled at crosscutting, with no tear-out. All of the plywood
cuts, even with the 1/4 " stock, were very clean.
"In comparison to the Budke
blade, the GP blade is quieter. Although this blade has less
teeth than the Budke blade, the Budke blade really zipped
through the wood in ripping. The GP blade demands a slower
rate of feed, but the results speak for themselves. As far as
getting a finished edge that you can take right to glue-up,
this new blade cannot be beat.
"I'm enjoying the blade."
Steve Read, McPherson, Kansas
Then there's this great review by NewWoodworker.com
|
PART# |
DESCRIPTION |
DIA |
TEETH |
ARBOR |
PLATE |
KERF |
TS |
PTS |
STS |
MS |
RA |
PRICE |
|
| 51821 |
10GP40-090 |
10 |
40 |
5/8 |
.090 |
.125 |
 |
|
|
|
|
61.50 |
 |
|
|
| TS |
Table Saw |
MS |
Miter Saw |
| PTS |
Portable Table
Saw |
SCM |
Sliding Compound
Miter Saw |
| STS |
Sliding Table
saw |
RA |
Radial Arm Saw |
| APPLICATIONS
FOR BUDKE COMBINATION BLADES |
| WOOD
& WOOD BASED MATERIALS |
NON-FERROUS
METAL |
| Crosscut |
E |
To 1" |
Aluminum
& Aluminum Extrusions |
NR |
3/16"
- 1/2" |
| AA |
To 2
1/2" |
NR |
1/2" -
1" |
| AA |
Over 2
1/2" (12" 14" 16") |
NR |
Over 1
1/2" |
| Ripping |
NR |
Rough Cut |
Copper
& Brass |
NR |
To
3/8" |
| E |
Average Cut |
NR |
Over
3/8" |
| AA |
Smooth Cut |
PLASTICS |
| NR |
Green
Lumber |
|
NR |
Hard,
Brittle |
| Combination |
E |
Rip More,
Crosscut Less |
NR |
Medium |
| E |
Rip Less,
Crosscut More |
NR |
Medium Soft |
| Miter
Cuts |
AA |
Wood |
E=EXCELLENT
AA=ABOVE AVERAGE
A=AVERAGE
NR=NOT RECOMMENDED
|
| NR |
Plastic |
| NR |
Non-Ferrous
Metal |
| Plywood |
E |
|
| Particle
Board |
E |
|
| Laminate
on Particle Board |
A |
To 1"
(BB) |
| A |
To 2
1/2" (BB) |
| Double
Laminate |
NR |
|
|
