|
|
|
SystiMatic
saw blades went out of production in
early 2011. They have some blades in
stock but we have no way of knowing
what's available and what's not until
we either send in an order or call
about an individual blade. Either way,
this is likely to cause a delay of a
day or two in getting you what you
need, if they don't have it. If you
want a SystiMatic blade, go ahead and
order it but be prepared to find out
it isn't available anymore.
Just Saw Blades recommends that you
select a blade from one of our other
two suppliers instead. Both Tenryu
and Popular
Tools make excellent saw blades
for most applications. Tenryu blades
tend to be a bit thinner and lighter
than SystiMatic but do just as good
(or better) a job. If you feel you
need or want a heavier industrial
grade blade, Popular Tools has a wider
selection than anyone.
We
recommend Tenryu for Miter Saw Blades.
They have a great selection of blades
that will give you the smoothest cuts
you can imagine! http://justsawblades.com/ten/miter_saw_blades.html
|
| PT -
Alternate Top Bevel (wood) |
10º Hook |
RM,MC -
Triple Chip Grind (metal) |
Neg 6º Hook |
| PC - Triple
Chip Grind (plastics) |
10º Hook |
PT/N, RT -
Alternate Top Bevel (wood) |
Neg 6º Hook |
GP - General Purpose |
|
Our shipping and handling fees
are just what UPS charges us based on weight and destination. There is no markup. Want more information on our
shipping? See Shipping Notes
| BLADE
SPECIFICATIONS |
MACHINE
TYPE |
| SystiMatic
has many larger blades rated for compound miter saws.
Please see the Precision Trim, Plastic and Trim and
Aluminator pages.
|
| TS |
Table Saw |
CM |
Compound Miter
Saw |
| PTS |
Portable
Table Saw |
SCM |
Sliding
Compound Miter Saw |
| STS |
Sliding
Table saw |
RA |
Radial Arm
Saw |
| MS |
Miter Saw |
SLR |
Straight
Line Rip Saw |
|
APPLICATIONS
FOR COMPOUND MITER BLADES |
|
WOOD
& WOOD BASED MATERIALS |
NON-FERROUS
METAL |
| Crosscut |
E |
To 1" |
Aluminum
& Aluminum Extrusions |
E |
3/16" -
1/2" RM, MC |
| E |
To 2
1/2" (10", 12" Only) |
AA |
1/2" -
1" RM, MC |
| E |
Over 2
1/2" (12" Only) |
A |
Over 1
1/2" RM, MC |
| Ripping |
NR |
Rough Cut |
Copper
& Brass |
AA |
To 3/8"
RM, MC |
| NR |
Average Cut |
AA |
Over
3/8" RM, MC |
| NR |
Smooth Cut |
PLASTICS |
| NR |
Green Lumber |
|
AA |
Hard,
Brittle - PC, MC, RM |
| Combination |
NR |
Rip More,
Crosscut Less |
AA |
Medium - PC,
MC, RM |
| NR |
Rip Less,
Crosscut More |
AA |
Medium Soft
- PC, MC, RM |
| Miter
Cuts |
E |
Wood - PT,
RT, RM, PC |
E=EXCELLENT
AA=ABOVE AVERAGE
A=AVERAGE
NR=NOT RECOMMENDED
|
| E |
Plastic -
PC, RM, GP |
| E |
Non-Ferrous
Metal-MC, RM |
| Plywood |
E |
PT, RT |
| Particle
Board |
E |
RM, MC, GP |
| Laminate
on Particle Board |
NR |
To 1" |
| NR |
To 2
1/2" |
| NR |
Over 2
1/2" |
| Double
Laminate |
NR |
|
|