|
|
SystiMatic
saw blades went out of production in
early 2011. They have some blades in
stock but we have no way of knowing
what's available and what's not until
we either send in an order or call
about an individual blade. Either way,
this is likely to cause a delay of a
day or two in getting you what you
need, if they don't have it. If you
want a SystiMatic blade, go ahead and
order it but be prepared to find out
it isn't available anymore.
Just Saw Blades recommends that you
select a blade from one of our other
two suppliers instead. Both Tenryu
and Popular
Tools make excellent saw blades
for most applications. Tenryu blades
tend to be a bit thinner and lighter
than SystiMatic but do just as good
(or better) a job. If you feel you
need or want a heavier industrial
grade blade, Popular Tools has a wider
selection than anyone.
Popular
Tools has a great selection of blades
to fit any double miter saw, even with
metric arbors and pin holes. http://justsawblades.com/popular/miter_blades.html |
DM - Triple Chip Grind / ALUMINATOR™/ HSR™ GOLD
/ Non-ferrous
DW - 4 ATB and 1 Raker / Wood
WM - Modified Triple Chip Grind/HSR™ GOLD / Wood /
Non-ferrous
Negative 3º Hook |
|
Our shipping and handling fees
are just what UPS charges us based on weight and destination. There is no markup. Want more information on our
shipping? See Shipping Notes
| BLADE
SPECIFICATIONS |
MACHINE
TYPE |
| TS |
Table Saw |
CM |
Compound Miter
Saw |
| PTS |
Portable
Table Saw |
SCM |
Sliding
Compound Miter Saw |
| MS |
Miter Saw |
RA |
Radial Arm
Saw |
|
APPLICATIONS
FOR DOUBLE MITER BLADES |
|
WOOD
& WOOD BASED MATERIALS |
NON-FERROUS
METAL |
| Crosscut |
E |
To 1" |
Aluminum
& Aluminum Extrusions |
E |
3/16" -
1/2" (DM, WM) |
| E |
To 2
1/2" |
E |
1/2" -
1" (DM, WM) |
| AA |
Over 2
1/2" |
E |
Over 1
1/2" (DM, WM) |
| Ripping |
NR |
Rough Cut |
Copper
& Brass |
E |
To 3/8"
(DM, WM) |
| NR |
Average Cut |
E |
Over
3/8" (DM, WM) |
| NR |
Smooth Cut |
PLASTICS |
| NR |
Green Lumber |
|
AA |
Hard,
Brittle |
| Combination |
NR |
Rip More,
Crosscut Less |
E |
Medium |
| NR |
Rip Less,
Crosscut More |
AA |
Medium Soft |
| Miter
Cuts |
E |
Wood |
E=EXCELLENT
AA=ABOVE AVERAGE
A=AVERAGE
NR=NOT RECOMMENDED
|
| E |
Plastic |
| E |
Non-Ferrous
Metal (DM, WM) |
| Plywood |
NR |
|
| Particle
Board |
E |
|
| Laminate
on Particle Board |
AA |
To 1" |
| A |
To 2
1/2" |
| NR |
Over 2
1/2" |
| Double
Laminate |
A |
|
|
