Site Map  FAQ
SystiMatic®
Professional
Quality
 General Purpose Blade by SystiMatic All Blades 25% 
Off List!
Click here to see some examples of who's using SystiMatic blades from Just Saw Blades
 

 GENERAL PURPOSE BLADE
Home
Saw Blade Terminology:
Blade Design Terms
Combination Saw Blades:
All-Purpose Table Saw Blades
Aluminum Cutting Saw Blades:
Aluminum, Copper
Miter Saw Blades:
Ideal for Miter & Chop Saws
Compound Miter Saw Blades: Better Than Original Equipment
Heavy Duty Miter Saw Blades:
For Double Miter Saws & Industrial Applications
Radial Arm Saw Blades: Negative Hook Angles for Safe Cutting
Precision Trim Saw Blades: Smooth End Cuts in Wood
Teflon Coated Saw Blades: for Reduced Friction
Thin Kerf Saw Blades: Ultra Thin Plate & Kerf
Plastic & Trim Saw Blades: Chip Free Cuts in Plastic & Overlays
Melamine-
Veneer Saw Blades: Chip-free Cuts in Melamine Board & Fine Veneers
Rip Saw Blades: Clean Rip Cuts in Any Solid Wood
Contractor Saw Blades:
For Lumberyards & Contractors
Plywood Saw Blades: Ultimate Cabinet Shop Blade
Dado Sets:
Superfine & Fine Dados
Accessories:
Bushings, 
Dado Shims
Our Policies:
Privacy, Security, Returns, Shipping
Contact Us
Customer Links
See who's using SystiMatic in their shops

General Purpose Blade by SystiMatic The General Purpose saw blade, designed for ripping and crosscutting solid wood, plywood and particle board.
This new addition to the SystiMatic family of professional quality saw blades is designed to do many jobs: ripping and crosscutting in solid wood, plywood and particle board. Made with tough C4 carbide, it will outlast other blades and continue to give superior cuts because it stays sharp longer than blades with softer carbide. And when we say superior cuts, we mean it: clean, true and chip-free. For table saws, radial arm and miter saws.
GP - 20º Alternating Top Bevel             15º Hook Angle
Don't believe us? Read what customers are saying:  

"The new Systimatic 40 tooth General Purpose blade has much to recommend it. For starters, I did a run-out test using a dial indicator gauge accurate to .001, and the blade was dead-on flat. During the course of working on various projects, I ripped and crosscut five-quarter and four-quarter oak, and 3/4" and 1/4" plywood. 

"The performance of the blade in ripping is very impressive. The cuts are clean, flat, and true.  I didn't even need to use my jointer before gluing the boards into a panel -- in fact, the blade did a better job than my jointer! All of the rip cuts exhibited zero tear-out.  

"The General Purpose blade also excelled at crosscutting, with no tear-out. All of the plywood cuts, even with the 1/4 " stock, were very clean.

"In comparison to the Budke blade, the GP blade is quieter. Although this blade has less teeth than the Budke blade, the Budke blade really zipped through the wood in ripping. The GP blade demands a slower rate of feed, but the results speak for themselves. As far as getting a finished edge that you can take right to glue-up, this new blade cannot be beat. 

"I'm enjoying the blade."
Steve Read, McPherson, Kansas

Our shipping and handling fees are just what UPS charges us based on weight and destination. There is no markup. Want more information on our shipping? See Shipping Notes 

Does your saw have a smaller size arbor shaft? Order a blade and we'll throw in a reducing bushing (for that blade only)  FREE! When you receive your emailed invoice, immediately hit "reply" and tell us what size you need and we'll have the correct bushing included in the package. 5/8" to 1/2", 1" to 3/4", 1" to 5/8", 1" to 7/8", 1" to 20mm only.

Have a larger than standard arbor on your saw? Click here.

PART#

DESCRIPTION

DIA

TEETH

ARBOR

PLATE

KERF

TS

 PTS STS MS RA PRICE
51821 10GP40-090 10 40 5/8 .090 .125 61.50
TS Table Saw MS Miter Saw
PTS Portable Table Saw SCM Sliding Compound Miter Saw
STS Sliding Table saw RA Radial Arm Saw

APPLICATIONS FOR GP BLADES

WOOD & WOOD BASED MATERIALS

NON-FERROUS METAL
Crosscut E To 1" Aluminum & Aluminum Extrusions NR 3/16" - 1/2"
A To 2"  NR 1/2" - 1"
NR Over 2 1/2" NR Over 1 1/2"
Ripping E Rough Cut Copper & Brass NR To 3/8"
E Average Cut NR Over 3/8"
E Smooth Cut

PLASTICS
NR Green Lumber   NR Hard, Brittle
Combination E Rip More, Crosscut Less NR Medium
E Rip Less, Crosscut More NR Medium Soft
Miter Cuts AA Wood

E=EXCELLENT
AA=ABOVE AVERAGE
A=AVERAGE
NR=NOT RECOMMENDED
NR Plastic
NR Non-Ferrous Metal
Plywood E Veneer
Particle Board E Double-sided Melamine
Laminate on Particle Board AA To 1 1/2"
AA To 2 1/2"
AA Over 2 1/2"
Double Laminate A  

 

Questions? Click here

SystiMatic® is a registered Trademark of Simonds International Corporation
JUST SAW BLADES is a division of 1950 Marketing,  Bellevue, WA 98008
All rights reserved.