|
|
SystiMatic
saw blades went out of production in
early 2011. They have some blades in
stock but we have no way of knowing
what's available and what's not until
we either send in an order or call
about an individual blade. Either way,
this is likely to cause a delay of a
day or two in getting you what you
need, if they don't have it. If you
want a SystiMatic blade, go ahead and
order it but be prepared to find out
it isn't available anymore.
Just Saw Blades recommends that you
select a blade from one of our other
two suppliers instead. Both Tenryu
and Popular
Tools make excellent saw blades
for most applications. Tenryu blades
tend to be a bit thinner and lighter
than SystiMatic but do just as good
(or better) a job. If you feel you
need or want a heavier industrial
grade blade, Popular Tools has a wider
selection than anyone.
Both
Tenryu and Popular Tools have good
selections of high quality aluminum
cutting blades. We recommend Tenryu
for this one. http://justsawblades.com/ten/alum.html |
|
|
|
Our shipping and handling fees
are just what UPS charges us based on weight and destination. There is no markup. Want more information on our
shipping? See Shipping Notes
MC, DM - Triple Chip
Grind -3º
Negative Hook (-2º Hook on
15MC)
| BLADE
SPECIFICATIONS |
MACHINE
TYPE |
| TS |
Table
Saw |
CM |
Compound
Miter Saw |
| PTS |
Portable
Table Saw |
SCM |
Sliding
Compound Miter Saw |
| STS |
Sliding
Table saw |
RA |
Radial
Arm Saw |
| MS |
Miter Saw |
SLR |
Straight
Line Rip Saw |
| * Note:
This is a thinner plate and kerf than the HSR Gold
blades but otherwise the same design and uses. |
For more selection of aluminum
cutting blades see our page of TENRYU
Alumi-Cut and Pro Series For Aluminum. For steel
cutting blades, go to TENRYU
Steel Cutting Blades.
HSR™
GOLD HEAVY DUTY METAL BLADES
|
 |
Rugged
utility blade for cutting solid
non-ferrous metals.
(For most
extrusions, see section above.)
Designed to
eliminate blade damage in
abusive applications, these
blades are tough and very safe
to use. The
"controlled-chip"
design makes it virtually
impossible to over feed or grab,
by limiting the amount of
material cut by each tooth. A
good choice for working with
thicker solid stock on radial arm,
miter and table saws; also
excellent for plastic and wood
cutting. ALWAYS clamp and
lubricate your work when cutting
metals to reduce vibration for
smoother, more accurate cuts!
And lubrication helps the blade
run cooler and cleaner with less
friction, for a longer life. |
HM - Triple Chip
Grind 2º
Negative Hook
|
| BLADE
SPECIFICATIONS |
MACHINE
TYPE |
| PART# |
DESCRIPTION |
DIA. |
TEETH |
ARB. |
PLATE |
KERF |
TS |
PTS |
STS |
MS |
CM |
SCM |
RA |
PRICE |
| 37275 |
14HM48-120NG |
14 |
48 |
1 |
.120 |
.160 |
 |
|
|
|
|
|
|
117.00 |
 |
| 37278 |
16HM60-134NG |
16 |
60 |
1 |
.134 |
.174 |
|
|
|
|
|
|
|
126.50 |
|
| 37269 |
18HM70-134NG |
18 |
70 |
1 |
.134 |
.174 |
|
|
|
|
|
|
|
173.50 |
|
| 37271 |
20HM80-148NG |
20 |
80 |
1 |
.148 |
.188 |
|
|
|
|
|
|
|
169.50 |
|
|
APPLICATIONS
FOR ALUMINATOR™ & HSR™ GOLD HEAVY DUTY
BLADES |
|
WOOD
& WOOD BASED MATERIALS |
NON-FERROUS
METAL |
| Crosscut |
A |
To
1" - MC, HM |
Aluminum
& Aluminum Extrusions |
E |
3/16"
- 1/2" - MC, DM |
| A |
To 2
1/2" - MC, HM |
E |
1/2"
- 1" - HM |
| A |
Over 2
1/2" - MC, HM |
E |
Over 1
1/2" - HM |
| Ripping |
NR |
Rough
Cut |
Copper
& Brass |
E |
To
3/8" - MC, DM |
| NR |
Average
Cut |
AA |
Over
3/8" - HM |
| NR |
Smooth
Cut |
PLASTICS |
| NR |
Green
Lumber |
|
E |
Hard,
Brittle - DM |
| Combination |
NR |
Rip
More, Crosscut Less |
AA |
Medium -
MC, HM |
| NR |
Rip
Less, Crosscut More |
A |
Medium
Soft - MC |
| Mitre
Cuts |
AA |
Wood |
E=EXCELLENT
AA=ABOVE AVERAGE
A=AVERAGE
NR=NOT RECOMMENDED
|
| AA |
Plastic |
| E |
Non-Ferrous
Metal |
| Plywood |
A |
MC, HM |
| Particle
Board |
AA |
MC, DM |
| Laminate
on Particle Board |
A |
To
1" - MC, DM |
| A |
To 2
1/2" - MC, DM |
| NR |
Over 2
1/2" |
| Double
Laminate |
A |
|
|
