|
|
SystiMatic
saw blades went out of production in early 2011. They have
some blades in stock but we have no way of knowing what's
available and what's not until we either send in an order
or call about an individual blade. Either way, this is
likely to cause a delay of a day or two in getting you
what you need, if they don't have it. If you want a
SystiMatic blade, go ahead and order it but be prepared to
find out it isn't available anymore.
Just Saw Blades recommends that you select a blade from
one of our other two suppliers instead. Both Tenryu
and Popular
Tools make excellent saw blades for most applications.
Tenryu blades tend to be a bit thinner and lighter than
SystiMatic but do just as good (or better) a job. If you
feel you need or want a heavier industrial grade blade,
Popular Tools has a wider selection than anyone.
We recommend Popular
Tools Combination blades or General Purpose ATB blades for
plywoods. For extra-fine veneered plywoods, we recommend a
Melamine/Veneer blade.
http://justsawblades.com/popular
|
Our shipping and handling fees
are just what UPS charges us based on weight and destination. There is no markup. Want more information on our
shipping? See Shipping Notes
PM - 10 ATB Tooth
and Raker Grind on 10" and 12" blades
8 ATB Tooth and Raker Grind on the 14" blade
15º Hook
| BLADE
SPECIFICATIONS |
MACHINES |
|
PART# |
DESCRIPTION |
DIA |
TEETH |
ARBOR |
PLATE |
KERF |
TS |
PTS |
STS |
RA |
PRICE |
|
|
37321 |
12PM66-095 |
12 |
66 |
1 |
.095 |
.145 |
 |
X |
|
|
91.00 |
 |
|
37320 |
14PM72-109 |
14
|
72 |
1 |
.109 |
.161 |
|
X |
|
|
169.00 |
|
| TS |
Table Saw |
STS |
Sliding Table
saw |
| PTS |
Portable Table
Saw |
RA |
Radial Arm Saw |
|
APPLICATIONS
FOR PLYMASTER PLYWOOD SAW BLADES |
|
WOOD
& WOOD BASED MATERIALS |
NON-FERROUS
METAL |
| Crosscut |
E |
To 1" |
Aluminum
& Aluminum Extrusions |
NR |
3/16" -
1/2" |
| E |
To 2 1/2"
(12", 14" Only) |
NR |
1/2" -
1" |
| E |
Over 2 1/2"
(12", 14" Only) |
NR |
Over 1 1/2" |
| Ripping |
NR |
Rough Cut |
Copper
& Brass |
NR |
To 3/8" |
| E |
Average Cut |
NR |
Over 3/8" |
| AA |
Smooth Cut |
PLASTICS |
| NR |
Green Lumber |
|
NR |
Hard, Brittle |
| Combination |
AA |
Rip More,
Crosscut Less |
NR |
Medium |
| E |
Rip Less,
Crosscut More |
NR |
Medium Soft |
| Mitre
Cuts |
E |
Wood |
E=EXCELLENT
AA=ABOVE AVERAGE
A=AVERAGE
NR=NOT RECOMMENDED
|
| NR |
Plastic |
| NR |
Non-Ferrous
Metal |
| Plywood |
E |
|
| Particle Board |
E |
|
| Laminate
on Particle Board |
AA |
To 1" |
| AA |
To 2 1/2" |
| A |
Over 2 1/2" |
| Double Laminate |
NR |
|
|
