|
|
SystiMatic
saw blades went out of production in early
2011. They have some blades in stock but
we have no way of knowing what's available
and what's not until we either send in an
order or call about an individual blade.
Either way, this is likely to cause a
delay of a day or two in getting you what
you need, if they don't have it. If you
want a SystiMatic blade, go ahead and
order it but be prepared to find out it
isn't available anymore.
Just Saw Blades recommends that you select
a blade from one of our other two
suppliers instead. Both Tenryu
and Popular
Tools make excellent saw blades for
most applications. Tenryu blades tend to
be a bit thinner and lighter than
SystiMatic but do just as good (or better)
a job. If you feel you need or want a
heavier industrial grade blade, Popular
Tools has a wider selection than anyone.
For
table saw trim blades, we recommend
Popular Tools Trim blades and Precision
Trim blades. http://justsawblades.com/popular/trim_blades.html
|
| PT |
Alternate
Top Bevel Grind |
10º
Hook |
| RT |
Radial
Trim Alternate Top Bevel Grind |
-
6º Hook |
| SF |
Super
Finish Steep Alternate Top Bevel Grind |
10º
Hook |
|
|
Our shipping and handling fees
are just what UPS charges us based on weight and destination. There is no markup.
Want more information on our shipping? See Shipping
Notes
| BLADE
SPECIFICATIONS |
MACHINE
TYPE |
| TS |
Table Saw |
CM |
Compound Miter Saw |
| PTS |
Portable Table
Saw |
SCM |
Sliding Compound
Miter Saw |
| STS |
Sliding Table
saw |
RA |
Radial Arm Saw |
| MS |
Miter Saw |
|
|
* These
blades, with "TL" in the description, are Thin Line, with
a thinner plate and narrower kerf. Please note the different machine
recommendations!
|
APPLICATIONS
FOR PRECISION TRIM SAW BLADES |
|
WOOD
& WOOD BASED MATERIALS |
NON-FERROUS
METAL |
| Crosscut |
E |
To 1" |
Aluminum
& Aluminum Extrusions |
NR |
3/16" -
1/2" |
| E |
To 2 1/2" |
NR |
1/2" -
1" |
| AA |
Over 2 1/2" |
NR |
Over 1 1/2" |
| Ripping |
NR |
Rough Cut |
Copper
& Brass |
NR |
To 3/8" |
| NR |
Average Cut |
NR |
Over 3/8" |
| NR |
Smooth Cut |
PLASTICS |
| NR |
Green Lumber |
|
NR |
Hard, Brittle |
| Combination |
NR |
Rip More,
Crosscut Less |
NR |
Medium |
| NR |
Rip Less,
Crosscut More |
NR |
Medium Soft |
| Miter
Cuts |
NR |
Wood |
E=EXCELLENT
AA=ABOVE AVERAGE
A=AVERAGE
NR=NOT RECOMMENDED
|
| NR |
Plastic |
| NR |
Non-Ferrous
Metal |
| Plywood |
E |
|
| Particle Board |
E |
|
| Laminate
on Particle Board |
A |
To 1" |
| A |
To 2 1/2" |
| A |
Over 2 1/2" |
| Double Laminate |
NR |
|
|
