|
|
 |
Designed
for safe, smooth cuts on radial arm,
sliding compound miter and chop saws.
Reduce the chances of
grabbing or overfeeding with these
negative hook angle radial arm saw blades. Choose the
RT for crosscutting or cutoff work or
the RM for all-purpose cutting -
including cutting of
non-ferrous metals on radial arm and sliding
miter saws. As
always, choose a lower tooth count for
thicker material and a higher count for
thinner stock. |
| RM |
Triple
Chip Grind |
6º
Negative Hook Angle |
| RT |
Alternate
Top Bevel Grind |
6º
Negative Hook Angle |
| GP |
General
Purpose |
15º
Hook Angle |
|
|
Our shipping and handling fees
are just what UPS charges us based on weight and destination. There is no markup.
Want more information on our shipping? See Shipping
Notes
Does your saw have a smaller size arbor shaft? Order a
blade and we'll throw in a reducing bushing FREE! When you
receive your emailed invoice, immediately hit
"reply" and tell us what
size you need and we'll have the correct bushing included in the
package. 5/8" to 1/2", 1" to 3/4", 1"
to 5/8", 1" to 7/8", 1" to 20mm only. Have
a larger than standard arbor on your saw? Click here.
| BLADE
SPECIFICATIONS |
MACHINES |
| SystiMatic
has many more blades rated for radial arm saws. Please
see the Precision Trim, Plastic and Trim and Aluminator
pages.
|
| TS |
Table Saw |
CM |
Compound Miter Saw |
| PTS |
Portable Table
Saw |
SCM |
Sliding Compound
Miter Saw |
| STS |
Sliding Table
saw |
RA |
Radial Arm Saw |
| MS |
Miter Saw |
|
|
|
APPLICATIONS
FOR RADIAL ARM SAW BLADES |
|
WOOD
& WOOD BASED MATERIALS |
NON-FERROUS
METAL |
| Crosscut |
E |
To 1" |
Aluminum
& Aluminum Extrusions |
AA |
3/16" -
1/2" - RM, GP |
| E |
To 2 1/2"
(10", 12" Only) |
AA |
1/2" -
1" - RM |
| E |
Over 2 1/2"
(12" only) |
NR |
Over 1 1/2" |
| Ripping |
NR |
Rough Cut |
Copper
& Brass |
A |
To 3/8" -
RM |
| AA |
Average Cut |
A |
Over 3/8" -
RM |
| AA |
Smooth Cut |
PLASTICS |
| NR |
Green Lumber |
|
A |
Hard, Brittle -
RM |
| Combination |
A |
Rip More,
Crosscut Less |
A |
Medium - RM |
| E |
Rip Less,
Crosscut More |
A |
Medium Soft - RM,
RT |
| Mitre
Cuts |
AA |
Wood - RT, RM,
GP |
E=EXCELLENT
AA=ABOVE AVERAGE
A=AVERAGE
NR=NOT RECOMMENDED
|
| AA |
Plastic - RM, GP |
| AA |
Non-Ferrous
Metal - RM, GP |
| Plywood |
AA |
RT, GP |
| Particle Board |
AA |
GP |
| Laminate
on Particle Board |
AA |
To 1" |
| A |
To 2 1/2" |
| NR |
Over 2 1/2" |
| Double Laminate |
NR |
|
|
