|
|
 |
Get
much longer blade life with these
TFE Coated Blades.
The TFE Red coated
blade was originated by SystiMatic® and
is still the industry standard. The
Teflon coating on these is a tough
commercial aerospace grade, with a low
drag coefficient used in high friction
wear applications. The exclusive tooth
geometry gives you very smooth cut
performance in all types of wood. |
Most of these are fantastic
trim/finish blades, with Alternate Top Bevel and Alternate Face Bevel!
Exceptions: 37428 and 37431 are Plymaster Blades with a Chamfered Raker
every 10 teeth and 37433 is a
rip blade with Chamfered Flat Top teeth |
|
Our shipping and handling fees
are just what UPS charges us based on weight and destination. There is no markup.
Want more information on our shipping? See Shipping
Notes
Does your saw have a smaller size arbor shaft? Order a
blade and we'll throw in a reducing bushing (for that blade
only) FREE! When you
receive your emailed invoice, immediately hit
"reply" and tell us what
size you need and we'll have the correct bushing included in the
package. 5/8" to 1/2", 1" to 3/4", 1"
to 5/8", 1" to 7/8", 1" to 20mm only. Have
a larger than standard arbor on your saw? Click here.
| BLADE
SPECIFICATIONS |
MACHINE
TYPE |
| TS |
Table Saw |
CM |
Compound Miter Saw |
| PTS |
Portable Table
Saw |
SCM |
Sliding Compound
Miter Saw |
| STS |
Sliding Table
saw |
GR |
Gang Rip Saw |
| MS |
Miter Saw |
|
|
|
APPLICATIONS
FOR TFE BANDITS™ COATED SAW BLADES |
|
WOOD
& WOOD BASED MATERIALS |
NON-FERROUS
METAL |
| Crosscut |
E |
To 1" |
Aluminum
& Aluminum Extrusions |
NR |
3/16" -
1/2" |
| E |
To 2 1/2" |
NR
|
1/2" -
1" |
| NR |
Over 2 1/2" |
NR |
Over 1 1/2" |
| Ripping |
NR |
Rough Cut |
Copper
& Brass |
NR |
To 3/8" |
| NR |
Average Cut |
NR |
Over 3/8" |
| NR |
Smooth Cut |
PLASTICS |
| NR |
Green Lumber |
|
NR |
Hard, Brittle |
| Combination |
NR |
Rip More,
Crosscut Less |
NR |
Medium |
| NR |
Rip Less,
Crosscut More |
NR |
Medium Soft |
| Mitre
Cuts |
E |
Wood |
E=EXCELLENT
AA=ABOVE AVERAGE
A=AVERAGE
NR=NOT RECOMMENDED
|
| NR |
Plastic |
| NR |
Non-Ferrous
Metal |
| Plywood |
E |
|
| Particle Board |
E |
|
| Laminate
on Particle Board |
NR |
To 1" |
| NR |
To 2 1/2" |
| NR |
Over 2 1/2" |
| Double Laminate |
NR |
|
|