|
|
SystiMatic
saw blades went out of production in
early 2011. They have some blades in
stock but we have no way of knowing
what's available and what's not until
we either send in an order or call
about an individual blade. Either way,
this is likely to cause a delay of a
day or two in getting you what you
need, if they don't have it. If you
want a SystiMatic blade, go ahead and
order it but be prepared to find out
it isn't available anymore.
Just Saw Blades recommends that you
select a blade from one of our other
two suppliers instead. Both Tenryu
and Popular
Tools make excellent saw blades
for most applications. Tenryu blades
tend to be a bit thinner and lighter
than SystiMatic but do just as good
(or better) a job. If you feel you
need or want a heavier industrial
grade blade, Popular Tools has a wider
selection than anyone.
We
recommend Tenryu if you like narrow kerf
blades. Most of their blades are
significantly thinner than industrial
blades like SystiMatic. But every bit as
good. http://justsawblades.com/ten
|
| PC |
Triple
Chip Grind |
10º
Hook |
PT |
Alternate
Top Bevel Grind |
10º
Hook |
| BB |
4
Tooth and Raker |
15º
Hook |
HR |
Triple
Chip Grind |
20º
Hook |
| MC |
Triple
Chip Grind |
-
2º
Hook |
|
|
|
|
|
Our shipping and handling fees
are just what UPS charges us based on weight and destination. There is no markup.
Want more information on our shipping? See Shipping
Notes
| BLADE
SPECIFICATIONS |
MACHINES |
| TS |
Table Saw |
CM |
Compound Miter Saw |
| PTS |
Portable Table
Saw |
SCM |
Sliding Compound
Miter Saw |
| STS |
Sliding Table
saw |
RA |
Radial Arm Saw |
| MS |
Miter Saw |
|
|
* Non-Ferrous
Blade
|
APPLICATIONS
FOR THIN LINE™ SAW BLADES |
|
WOOD
& WOOD BASED MATERIALS |
NON-FERROUS
METAL |
| Crosscut |
E |
To 1" |
Aluminum
& Aluminum Extrusions |
E |
3/16" -
1/2" MC |
| E |
To 2 1/2" |
E |
1/2" -
1" MC |
| E |
Over 2 1/2" |
AA |
Over 1 1/2"
MC |
| Ripping |
NR |
Rough Cut |
Copper
& Brass |
AA |
To 3/8" MC |
| AA |
Average Cut |
AA |
Over 3/8"
MC |
| E |
Smooth Cut (8
1/4", 10", 12" Only) |
PLASTICS |
| NR |
Green Lumber |
|
E |
Hard, Brittle
(10", 12", 14", 15" Only) PC |
| Combination |
E |
Rip More,
Crosscut Less BB |
AA |
Medium - PC |
| E |
Rip Less,
Crosscut More BB |
AA |
Medium Soft - PC |
| Miter
Cuts |
E |
Wood |
E=EXCELLENT
AA=ABOVE AVERAGE
A=AVERAGE
NR=NOT RECOMMENDED
|
| E |
Plastic
(10", 12", 14", 15 Only) PC |
| E |
Non-Ferrous
Metal (14", 15" Only) MC, PC |
| Plywood |
E |
|
| Particle Board |
AA |
|
| Laminate
on Particle Board |
AA |
To 1" |
| AA |
To 2 1/2" |
| NR |
Over 2 1/2" |
| Double Laminate |
NR |
|
|