|
Home
Choosing the Right Saw Blade
Tooth Geometry Explained
Miter Saw Blades
Aluminum Cutting Blades
Steel Cutting Blades
Table Saw Blades For Wood - Rapid Cut Series
Table Saw Blades For Wood - Pro Series
Combination Blades For Wood - Gold Medal Series
Gold Medal Dado Set
Plastic Cutting Blades
Melamine Saw Blades
Panel Saw Blades
Solid Surface Blades
Industrial Saw Blades
Our Policies
Contact Us
|
There are five series of steel-cutting blades
listed here - scroll down to see them all.
Please note all safety instructions before use and adhere
to instructions for maximum RPM speeds.
Use lower tooth counts for thicker material, higher counts for thin steel.
And please
scroll down to the bottom of the page for some important notes.
 |
STEEL-PRO SERIES - for cutting mild steel:
steel studs, steel sheet, steel pipe, channel, threaded rod and much, much
more.
Specially formulated C-6 carbide grade, combined with a
unique tip design, resists breakage on impact and lasts longer- much
longer than standard carbides or abrasive discs. Special tooth geometry
with "inserted" tooth design greatly improves security of the
tip, efficiency and durability.
- Rugged plates and specially formulated carbide tips
with a special tooth grind for fast, clean cuts.
- High quality cuts without the clouds of dust and
scorch marks associated with friction blades.
- Cool cuts that leave the work piece edge free of
burrs.
|
| DIA |
MODEL# |
TEETH |
ARBOR |
GRIND |
RAKE |
KERF |
MAC/RPM |
PRICE |
|
| 6" |
PRF-15238 |
38 |
1/2" |
MTCG |
0 |
.079 |
CT/9500 |
$45.00 |
 |
| 7-1/4" |
PRF-18538BW |
38 |
5/8"KO* |
ATB |
0 |
.079 |
CS/5800 |
$39.00 |
|
| 7-1/4" |
PRF-18538BW2 |
38 |
20mm |
MTCG |
0 |
.079 |
CS/5800 |
$39.00 |
|
| 7-1/4" |
PRF-18548BW |
48 |
5/8"KO* |
ATB |
0 |
.079 |
CS/5800 |
$40.50 |
|
| 7-1/4" |
PRF-18548BW2 |
48 |
20mm |
ATB |
0 |
.079 |
CS/5800 |
$40.50 |
|
| 7-1/4" |
PRF-18556CB |
56 |
5/8"KO* |
ATAF |
-10 |
.071 |
CS/5800 |
$49.50 |
|
| 7-1/4" |
PRF-18570CBN |
70 |
5/8"KO* |
ATB |
-10 |
.069 |
CS/5800 |
$52.50 |
|
| 7-1/4" |
PRF-18570BW2 |
70 |
20mm |
ATB |
-10 |
.069 |
CS/5800 |
$52.50 |
|
| 8" |
PRF-20348CBN |
48 |
5/8"KO* |
MTCG |
0 |
.087 |
CS/3700 |
$54.00 |
|
| 8-1/4" |
PRF-21048BW |
48 |
5/8"KO* |
MTCG |
0 |
.087 |
VAR/5800 |
$54.00 |
|
| 9" |
PRF-23048CBN |
48 |
1" |
ATB |
0 |
.087 |
CS/2700 |
$57.00 |
|
| 10" |
PRF-25550D |
50 |
1", 5/8" |
TCG |
0 |
.098 |
CS/1900 |
$82.50 |
|
| 12" |
PRF-30560D |
60 |
1" |
TCG |
0 |
.098 |
DC/2000 |
$88.50 |
|
| 14" |
PRF-35572D |
72 |
1" |
TCG |
0 |
.094 |
DC/1700 |
$132.00 |
|
| 16" |
PRF-40580D |
80 |
1" |
TCG |
0 |
.102 |
DC/1700 |
$375.00 |
|
|
* Arbor is a diamond shape for worm-drive saws, with a knock-out bushing
reducing it to 5/8" |
| CT - Corded Trim |
CS - Circular Saws |
DC - Dry Cut Saws |
| VAR - Various Saws |
|
|
STEEL-PRO SELECT SERIES - TENRYU'S 2nd Generation of
Steel-Pro...Quieter!
And last longer. Exclusive two-ply plate design provides
self-dampening and lower noise operation, plus the plates are individually
tensioned for a truer cut. Inserted teeth with chip limiting steel support
adds durability and safety.
| DIA |
MODEL# |
TEETH |
ARBOR |
GRIND |
RAKE |
KERF |
MAC/RPM |
PRICE |
|
| 7-1/4" |
PRF-18538DS |
38 |
5/8"KO* |
TCG |
0 |
.079 |
CS/5800 |
$54.00 |
|
| 7-1/4" |
PRF-18548DS |
48 |
5/8"KO* |
TCG |
0 |
.079 |
CS/5800 |
$54.00 |
|
| 10" |
PRF-25550DS |
50 |
1", 5/8" |
TCG |
0 |
.091 |
CS/1900 |
$105.00 |
|
| 12" |
PRF-30560DS |
60 |
1" |
TCG |
0 |
.094 |
DC/2000 |
$103.50 |
|
| 12" |
PRF-30580BWS |
80 |
1" |
MTCG |
-5 |
.091 |
DC/2000 |
$165.00 |
|
| 14" |
PRF-35572DS |
72 |
1" |
TCG |
0 |
.094 |
DC/1700 |
$132.00 |
|
| 14" |
PRF-35590BWS |
90 |
1" |
MTCG |
-5 |
.091 |
DC/1700 |
$180.00 |
|
|
* Arbor is a diamond shape for worm-drive saws, with a knock-out bushing
reducing it to 5/8" |
| CS - Circular Saws |
VAR - Various Saws |
DC - Dry Cut Saws |
STEEL-PRO PLUS SERIES - New Cermet
(ceramic-metal) Tips For Greater Impact Resistance and Longer Life
For
cutting steel with worm-drive saws.
| DIA |
MODEL# |
TEETH |
ARBOR |
GRIND |
RAKE |
KERF |
MAC/RPM |
PRICE |
|
| 7-1/4" |
PRF-18536CBNP |
36 |
Dia |
ATB |
0 |
.074 |
WD/8300 |
$67.50 |
|
| 7-1/4" |
PRF-18536CBNP2 |
36 |
20mm |
MTCG |
0 |
.074 |
WD/8300 |
$67.50 |
|
STEEL-PRO STABILIZER SERIES - Even less vibration, no
blade stabilizer needed
The "STABILIZER" plate (patent pending)
eliminates the need for a separate blade stabilizer. You'll get
straighter, cleaner cuts, longer blade life, less burring and of course,
less vibration. TENRYU has really raised the bar in steel cutting with
this series! Tough C6 carbide.
| DIA |
MODEL# |
TEETH |
ARBOR |
GRIND |
RAKE |
KERF |
MAC/RPM |
PRICE |
|
| 7-1/4" |
PRF-18536BWK |
36 |
5/8"KO* |
MTCG |
0 |
.079 |
CS/5800 |
$45.00 |
|
| 7-1/4" |
PRF-18536BWK2 |
36 |
20mm |
MTCG |
0 |
.079 |
CS/5800 |
$45.00 |
|
| 7-1/4" |
PRF-18548BWK |
48 |
5/8"KO* |
MTCG |
0 |
.079 |
CS/5800 |
$48.00 |
|
| 7-1/4" |
PRF-18548BWK2 |
48 |
20mm |
MTCG |
0 |
.079 |
CS/5800 |
$48.00 |
|
| 8" |
PRF-20348BWK |
48 |
5/8" |
MTCG |
0 |
.087 |
CS/3700 |
$60.00 |
|
| 8-1/4" |
PRF-21048BWK |
48 |
5/8"KO* |
MTCG |
0 |
.079 |
VAR/5800 |
$60.00 |
|
| 9" |
PRF-23048BWK |
48 |
1" |
MTCG |
0 |
.087 |
CS/2700 |
$60.00 |
|
| 12" |
PRF-30560DK |
60 |
1" |
TCG |
0 |
.098 |
DC/2000 |
$97.50 |
|
| 14" |
PRF-35572DK |
72 |
1" |
TCG |
0 |
.098 |
DC/1700 |
$148.50 |
|
|
* Arbor is a diamond shape for worm-drive saws, with a knock-out bushing
reducing it to 5/8" |
| CS - Circular Saws |
VAR - Various Saws |
DC - Dry Cut Saws |
Cord-Free Series for Steel - Now You Can Cut Mild Steel With Your
Cordless Saw!
Ultra-thin kerf for less resistance, which equals longer battery charges
and life for your machine.
| DIA |
MODEL# |
TEETH |
ARBOR |
GRIND |
RAKE |
KERF |
MAC/RPM |
PRICE |
|
| 5-3/8" |
CF-13530M |
30 |
10mm |
MTCG |
0 |
.059 |
CF/3200 |
$30.00 |
|
| 5-3/8" |
CF-13550M |
50 |
10mm |
MTCG |
0 |
.055 |
CF/3200 |
$40.50 |
|
| 6" |
CF-15238M |
38 |
1/2" |
MTCG |
0 |
.063 |
CF/2600 |
$40.50 |
|
| 6-1/2" |
CF-16548M |
48 |
5/8" |
MTCG |
0 |
.079 |
CFT/2600 |
$45.00 |
|
| 6-3/4" |
CF-17340M |
40 |
20mm |
ATB |
0 |
.071 |
CF/3500 |
$43.50 |
|
| CF - Cordless |
CFT - Cordless Trim |
 |
Steel-Pro for Stainless Steel
Recommended for
cutting 303 & 304 stainless steel on low RPM dry cut/metal cutting
saws. Greater cutting speed and longer life than the competition, with
less burring, no scorching and reduced sparking. Now with resin-filled
laser expansion slots for less vibration and truer cuts. New grade of
carbide for longer cutting life and inserted teeth with chip limiting
steel support for additional durability and safety.
|
| DIA |
MODEL# |
TEETH |
ARBOR |
GRIND |
RAKE |
KERF |
MAC/RPM |
PRICE |
|
| 12" |
SPS-30578 |
78 |
1" |
M-TCG |
10 |
.087 |
DC/1700 |
$202.50 |
|
| 14" |
SPS-35590 |
90 |
1" |
M-TCG |
10 |
.087 |
DC/1700 |
$225.00 |
|
LUBRICATION
It's always a good idea to lubricate when you're cutting any metal. Lubing
will dramatically increase the life of the blade and give you cleaner,
smoother, quieter cuts. Industrial, high-volume shops usually use an
automatic lubing system that sprays a non-petroleum lube - obviously,
that's the best method. But if you're not operating at that level, you
should still lubricate your blade. What can you use and where can you get
it? The most common blade lube for lighter use is a wax stick, such as
this one from Rockler: http://www.rockler.com/product.cfm?page=2331&filter=wax%20stick
Or, if you have a Home Depot near you, they (last I knew) carry a similar
stick from Oldham. Another and more high-tech solution is a water-based,
bottled spray, like this one also at Rockler.com: http://www.rockler.com/product.cfm?Offerings_ID=17325&TabSelect=Details
In a pinch, you can use a shot of WD-40 sprayed directly on the teeth or
on the material.
|
